Small Cabinet with Sliding Doors | DIY Woodworking скачать в хорошем качестве

Small Cabinet with Sliding Doors | DIY Woodworking

#Howto #Woodworking #Cabinet #Slidingdoors #Dados #Brattonbuilt #DIY #bratton #build Here's a pretty easy low cost project to add some storage. My son wanted a little cabinet to go under his desk to hold some of his gaming supplies, but I think this cabinet would be perfect for the workshop too. I might just have to make another to hang on the french cleat wall. I love the sliding doors with the finger holes! Easy to make and cheap! No need to spend more money on hinges and knobs. This cabinet is 18 inches tall, 22 inches wide, and 8 inches deep. See below for a cut list, tools and supplies used. Thanks for stopping by! --------------------------------------------------------------------------------------------------------------------------- CUTS USED FOR THIS CABINET: TOP, BOTTOM, AND UPPER SHELF: (3) 22″ x 8″ Pieces of 3/4″ Plywood ADJUSTABLE SHELF: (1) 21 7/8″ x 7″ Piece of 3/4″ Plywood SIDES: (2) 18″ x 8″ Pieces of 3/4″ Plywood DOORS: (2) 12 3/4″" x 11″ Pieces of 1/4″ Plywood BACKING: 22″ x 18″ Piece of 1/4″ Plywood SUPPLIES USED: Sandpaper (120 and 220 grit) Spray Lacquer Several 3/4″ wood screws Wood Glue 1 1/4″ Pocket Hole Screws TOOLS USED: Table Saw Dado Blades Drill (4) Pipe or bar Clamps (at least 24″) Squares Pocket Hole Jig Time Code: 0:00 - 0:32 INTRO 0:32 - 0:39 STEP 1: MAKE THE CUTS 0:45 -3:37 STEP 2: CUT THE DADOS 3:40 - 5:55 STEP 3: ASSEMBLE THE CARCASS 5:56 - 8:16 STEP 4: MAKE DOORS 8:16 - 9:18 STEP 5: ADD ADJUSTABLE SHELF 9:19 - 10:04STEP 6: BACK PANAL 10:04 - 10:29 STEP 7: LACQUER