Kanpur electric power plant|panki thermal power plant|MajorInfrastructure Development in pankikanpur скачать в хорошем качестве

Kanpur electric power plant|panki thermal power plant|MajorInfrastructure Development in pankikanpur

Kanpur electric power plant|panki thermal power plant|MajorInfrastructure Development in pankikanpur कानपुर पनकी पावर हाउस| kanpur Panki power house| electric power house| super sunday power house कानपुर, जेएनएन। पनकी पावर हाउस में बिजली का उत्पादन अगले वर्ष दिसंबर में शुरु करने का लक्ष्य निर्धारित किया गया है। सितंबर में ब्वायलर का हाइड्रोलिक टेस्ट होगा वहीं मार्च 2022 में इसमें लाइटअप (आग जलाई जाएगी) किया जाएगा। पनकी पावर हाउस में 660 मेगावाट सुपर क्रिटिकल प्लांट का काम चल रहा है। प्लांट से अगले वर्ष दिसंबर में बिजली का उत्पादन शुरु करने का लक्ष्य रखा गया है। पनकी पावर हाउस में चिमनी का काम पूरा हो चुका है। प्लांट पूरा होने के बाद यहां कोयले की खपत एक तिहाई हो जाएगी। ब्वायलर की गुणवत्ता को जांचने के लिए अगले माह इसका हाइड्रोलिक टेस्ट किया जाएगा। The Panki extension project involves the expansion of the existing Panki thermal power station’s (TPS) capacity from 210MW to 660MW. The project will be located in the premises of existing Panki TPS, approximately 16km from Kanpur, Uttar pradesh District of India. The plant will be developed as a lignite-fired, supercritical thermal power plant with a net output of 660MW. It is expected to start generating power during the 13th Plan period (2017-2022). Uttar Pradesh Rajya Vidyut Utpadan Nigam (UPRVUNL) is the project developer. Environmental clearance (EC) for the project was granted in 2017. The construction is estimated to take 46 months for completion. The plant is expected to start electricity generation in January 2022. PROJECT GALLERY Panki extension project make-up The existing Panki thermal power station consists of two 105MW coal-based power units, which were derated from 110MW. Two 32MW power units at the plant were closed, while the two 105MW units too will be decommissioned in phases, following the commissioning of the new 660MW unit. The expansion project will involve the installation of an electro-hydraulic steam turbine and a deaerator. The turbine will have three main parts - a single-flow high-pressure (HP) section, a double-flow intermediate-pressure (IP), and a low-pressure (LP) section. Individual shafts of the cylinders will be rigidly coupled with the generator rotor shaft. The high-pressure turbine will be a single flow type and will comprise two casings - an inner casing carrier and a barrel type outer casing. Steam will be supplied to the HP turbine by using two combined stop and control valves. The double-flow IP turbine will have a double-shelled casing system with horizontally split inner and outer #PankipowerplantKanpur#KanpurPan#kipowerplantelectriccityElectriccity #KanpurPower#PointKanpurPowerPoit #Kanpurvloug#Kanpurvlogger #KanpurPankipower#pointupdate