AR Blue Clean Speedy Wash Assembly скачать в хорошем качестве

AR Blue Clean Speedy Wash Assembly

Learn more at http://www.arblueclean.com Speedy Wash 1600 Power Washer Assembly Instructions: Make sure the unit is turned off by placing the switch in the off or O position. Use two of the screws provided, and with a phillips head screwdriver, attach the handle to the unit. Use the other two screws, and with the phillips head screwdriver, attach the cord wrap to the back of the unit. Connect the larger black end of the high pressure hose to the machine. Make sure the connection clicks tightly into place. Connect the silver metal end of the high pressure hose to the spray gun. You will hear it click into place. Make sure the bottom of the spray gun is pushed in, in the locked position. Later on, when you are ready to start cleaning, this will be released. Insert lance into spray gun by inserting, pushing together, and turning clockwise. To remove, turn it counter clockwise. Insert the 3 in 1 nozzle in the end of the wand, by pushing on the blue button, and pushing the nozzle down. Twist the nozzle in the direction indicated to select different spray patterns. For the wash brush, screw in the adapter and attach to the wand by turning clockwise. Thread the blue and black garden hose adapter to the end of your garden hose. Now thread the clear filter adapter to the front of the machine. Make sure it is snug, so it doesn't leak. Now we're ready to setup and start cleaning. Speedy Wash 1600 Operating Instructions Unwind the power cord completely, and plug the GFCI into a grounded 120 Volt outlet. Press the reset button on the GFCI plug. This will have to be done each and every time it is plugged in. Attach the garden hose by pulling back the blue sleeve and pushing it on the clear filter adapter on the front of the machine. You will hear a click when it locks into place. Make sure the high pressure hose is attached to the machine and the spray gun. Now turn on the water supply at the faucet. Release the safety lock on the spray gun, and while pointing in a safe direction, squeeze the trigger gun until there is a steady stream of water, letting the water and air run out of the hose. Turn the starter switch to on, or the I position. The motor and pump should now be ready to run, and provide a high pressure spray. Pull the trigger on the spray gun to activate the total stop system, turning the machine on, and now you can start cleaning. Releasing the spray gun automatically turns the unit off. Choose between the rotating turbo spray, for stubborn stains and dirt on hard surfaces, high pressure fan spray for normal cleaning, and low pressure for applying detergent, or rinsing, or even watering plants. Always test first in an inconspicuous area to make sure you don't damage the surface. Speedy Wash 1600 Detergent Siphoning Pull detergent siphoning tube from the back of the unit, and place in detergent. When the nozzle is set to a low pressure, the unit will draw detergent. This will help to enhance the cleaning, by removing oil, dirt, and oil film from surfaces. The brush will also siphon detergent by placing the siphoning tube in detergent, and pulling the trigger. With the adapter already attached, attach the brush to the trigger gun. Using the brush can help remove dirt from vehicles, outdoor furniture, or other surfaces when agitation is required. All the tools easily store on board for easy and convenient mobility to and from each cleaning task. Reverse the processes to shut down, and remember to keep the unit from freezing during the offseason. Before you start cleaning, refer to the manual for detailed instructions and safety precautions, as models may vary.