How To Make a Hand Filing Jig | Level 01 Knife Making скачать в хорошем качестве

How To Make a Hand Filing Jig | Level 01 Knife Making

Making a filing jig for knife blades. Simple, versatile, low cost and easy to make, this version should allow me to: Create accurate bevels, choose bevel angle and perfect plunge lines. This is part 2 of the Level 01 Knife Making Series, Check out part 1: How to Make a Mini Forge From a Baby Formula Can    • How to Make a Mini Forge From a Baby Formu...   Tools: Wood Saw Hacksaw Double cut File 250mm / 10 Inch Power Drill / Hand Drill Screwdriver 4/19 mm Drill bits Hammer + Center Punch Small Wrench Sanding Paper (80 grit) Pen Reamer *optional Clamps Materials: Wood Stock 65/65/400mm (2.5/2.5/16 Inch) Wood Stock 65/65/70mm (2.5/2.5/3 Inch) Wood Stock /plywood 90/300/15mm (3.5/12/0.75 inch) Swivel Caster Wheel Base 75mm (2.75 inch) Ikea Curtain rod (RÄCKA) or any two tubes that slide well as a telescope 3 times your file length (inner) 120mm (5 inch) outer 2 X 50mm M6 bolts and 20mm nylon sleeves 2 X 2/40/120mm Metal (steel or Aluminium) flat stock 2 X 18-38mm (7/8 - 1 1/2 inch) Adjustable Steel Clamp Various bolts and screws Let me know what you think in the comments. Offer Canfi (Taubenfligel)