Tutorial: Installing LineageOS 15.1 on GPD XD+ скачать в хорошем качестве

Tutorial: Installing LineageOS 15.1 on GPD XD+

Installing LineageOS: 1. Open SPFlash and swap into the Download tab. 2. Hit the "choose" Button for the "Scatter-loading File" section and select LineageOS.txt. 3. Swap to the Readback tab inside SPFlash. 4. Press the Add button, double-click the new line, set the filename to nvram.bin and click Save. 5. Change the start address to 0x380000, the Length to 0x500000 and click OK. 6. Press the Add button, double-click the new line, set the filename to nvdata.img and click Save. 7. Change the start address to 0x6b00000, the Length to 0x2000000 and click OK. 8. Click the "Read Back" button. 9. Ensure your XD+ is fully turned off and disconnected. 10. With your XD+ turned off, hold down the Volume+ Button, and while holding it down, connect it to your PC via a MicroUSB cable. 11. SPFlash will now backup your NVRAM into a nvram.bin and nvdata.img file and tell you when its done via a green check-mark popup. 12. Disconnect your XD+ from your PC once the backup has been completed. 13. Unpack the LineageOS 15.1 7z file and overwrite the included nvram.bin and nvdata.img file with the ones you previously backed up. 14. Swap to the Download tab inside SPFlash. 15. Choose "Format All + Download" in the mode dropdown field (which should read "Download Only" by default). 16. Click the "Download" button. 17. Ensure your XD+ is fully turned off and disconnected. 18. With your XD+ turned off, hold down the Volume+ Button, and while holding it down, connect it to your PC via a MicroUSB cable. 19. SPFlash will now flash LineageOS 15.1 onto your XD+ and tell you when its done via a green check-mark popup. 20. Disconnect your XD+ from your PC once the install has been completed. If you like what has been provided to you, or want to see more things like this, please consider backing me over at   / blackseraph   !