Drilling procedure for UNIQA Dental Pure & Porous Implant UH8 UV11 [ 3.3 mm | D4 bone density ] скачать в хорошем качестве

Drilling procedure for UNIQA Dental Pure & Porous Implant UH8 UV11 [ 3.3 mm | D4 bone density ]

🦷 Uniqa Dental Drilling Protocol https://uniqa.dental/wp-content/uploads/20... 🦷 IMPORTANT! To correctly install Uniqa Dental implants, it is necessary to follow the socket preparation protocol. The video shows the steps that need to be taken to install a 3.3 mm diameter implant into a D4 density soft bone. First, a socket must be made 1-2 mm deep in the hardest cortical layer of the bone using a special cortical bone drill. Then, a pilot drill with a diameter of 2 mm should be used to drill the socket to the full depth, which is typically up to 10 mm. The recommended rotational speed is 1000 rpm, and the maximum is 1200 rpm. Moderate pressure should be applied when drilling to avoid resistance from the bone and to ensure intensive irrigation for cooling the drill and bone. Next, a 2.5 mm diameter drill should be used to drill halfway through the socket. A 2.8 mm diameter drill can help drill a quarter of the socket depth. If resistance is encountered during the process, the drill may need to be replaced as it may have become dull. It is important not to drill without water, as this can lead to bone overheating and thermal necrosis of the bone tissue after the implant is installed. After this, the implant should be installed into the socket. The aggressive thread profile of Uniqa Dental implants allows it to be screwed directly into the bone tissue and provide good primary stability. The maximum permissible torque when installing the implant is 50 N*cm. It is important to carefully follow the instructions provided. Visit Uniqa Dental site https://uniqa.dental/?utm_source=youtube&u... More videos on this topic: The dental implants is placed on the smile line?    • The dental implants is placed on the smile...  . From a broken bar to screw retained restoration:    • From a broken bar to screw retained restor...  . Cemented restoration vs Screw Retained restoration in lack of space:    • Cemented restoration vs Screw Retained res...  . How to avoid bone loss in screw retained restoration? Using dental materials in case:    • How to avoid bone loss in screw retained r...   #dentalimplantsprocedure #dentalimplants #dentalimplantplacement #dentalimplantsvideo #dentalimplantprocedure #implantdrillingprocedure 🔗 Visit Uniqa Dental site https://uniqa.dental/?utm_source=youtube / 🔗 Personal-manager https://uniqa.dental/uniqa-personal-manage... 🔗 Full-Arch Restoration Workflow solution https://uniqa.dental/all-on-4-6-implants/?... Product 🦷 🔗About Test Kits https://uniqa.dental/about-trial-kits/?utm... 🔗About Implants https://uniqa.dental/uniqa-dental-implant/... 🔗Trial Kits https://uniqa.dental/trial-kits/?utm_sourc... 🔗Implants https://uniqa.dental/implants/?utm_source=... 🔗Abutments https://uniqa.dental/abutments/?utm_source... 🔗Multi-Unit Abutments https://uniqa.dental/multi-units/?utm_sour... 🔗Accessories for MUA https://uniqa.dental/accessories-for-multi... 🔗CAD/CAM https://uniqa.dental/cad-cam/?utm_source=y... 🔗Overdenture https://uniqa.dental/overdenture/?utm_sour... 🔗Laboratory https://uniqa.dental/laboratory/?utm_sourc... 🔗Instruments https://uniqa.dental/instruments/?utm_sour... 📞Customer Care: +1 737 710 17 25 📞 Logistics: +1 201 546 16 13 ✉️ Uniqa Dental Ltd 350 W Passaic St (3rd floor), Rochelle Park, NJ 07662 ✉️ 2 Ha-Tsoran St, Netanya, 4250602, Israel . ‼️ Disclaimer "The drilling protocol provided is only a general guideline and must be adapted to the individual patient, in particular to the clinical conditions, bone quality and surgeon preference. The practitioner is responsible to determine the appropriate protocol for each case based on the practitioner’s clinical knowledge, judgment and experience and the individual patient’s requirements. Uniqa Dental Ltd. does not accept any liability for any inconvenience or damage resulting from the use of the provided drilling protocol information."