Boslla Bullet B1 LED Headlight Review скачать в хорошем качестве

Boslla Bullet B1 LED Headlight Review

Here's a quick installation video of the Boslla Bullet B1 LED headlight bulb. This headlight bulb comes in a wide variety of sizes that will fit nearly all vehicles on the road. The color temperature is a bright 6500k, which will allow drivers with these headlights to have the best visibility down the road that is possible at night. Here's a link to Boslla's website where this headlight can be purchased: https://www.Boslla.com Here is the step-by-step install process for these LED headlights: 1. Remove headlights from packaging. 2. Remove standard retainer clip on each LED headlight and Install compatible retainer clip for mounting LED headlight in your vehicle's particular housing assembly (retainer clips available at https://www.Boslla.com). 3. Remove OEM headlight dust cover under the hood on your vehicle by pulling or twisting the cover counter clockwise (if your vehicle is equipped with a dust cover). 4. Unplug OEM headlight bulb from OEM wire harness. 5. Store OEM headlights in safe place in vehicle in case of emergency usage. 6. Plug Boslla LED headlight into driver/relay box (included) by aligning four prong adaptor on headlight cord with socket on the driver/relay box cord (This step not applicable to Boslla Bullet B1 LED headlights). 7. Plug driver/relay box into OEM headlight wiring harness. 8. Twist Boslla LED headlight clockwise until retainer clip fully latches in headlight housing. 9. Continue rotating the LED headlight clockwise until LED diodes face the left and right sides of the vehicle. 10. Store dust covers in vehicle in case of emergency usage with factory OEM headlights, close the vehicle's hood, and turn on your new Boslla Bullet LED headlights using OEM interior switch.