How to program a sanitary point level switch скачать в хорошем качестве

How to program a sanitary point level switch

In this video, you will learn how to use the moneo|configure software to program LMT series sanitary point level switch from ifm. The LMT series from ifm uses impedance spectroscopy as the sensing principle, which measure the electric and magnetic field strength at multiple frequencies between 50-200 MHz. This technology reads 3 measurements that different media types impact in different ways, giving each a unique profile. The 3 measurements include: • Attenuation of the electromagnetic field • Conductance of the electric field • Permittivity of the magnetic field If the measurements match the profile, it will signal that the media is present. Without the presence of the media or if only residue is present, the profile won’t match the measurements. This means the LMT series is immune to residue buildup, splashes, and foam, making it more reliable in sanitary applications than tuning fork sensors. This sensor is designed to perform best in industrial applications where you need to measure high and low level points in tanks of either liquids or bulk solids. It also can protect pumps from run-dry conditions for food products like milk, yogurt, beer, jelly, and cosmetics that are often difficult to measure due to viscosity or foam. Another common application includes differentiating between products, cleaning solutions, and water associated with different media profiles. Using IO-Link technology, you can setup and store profiles for different media types to identify what media is currently in the tank. This is especially helpful during cleaning cycles, since you can use data over IO-Link to differentiate between the media itself, build-up on the sensing face, and washing cycle steps. This video applies to the following article numbers: LMT100, LMT102, LMT104, LMT105, LMT110, LMT121, LMT202, and LMT302. ⌚ Timestamps: chapters ============================================== Intro : 0:12 Online LMT resources: 0:34 moneo|configure parameterization software: 1:05 Network scan: 1:11 Scanned sensor information: 1:36 Parameter options: 1:58 Cockpit view: 2:12 Demo sensor media: 2:30 Factory reset: 3:02 Real-time sensor parameters in moneo|configure: 3:27 Demo sensor cockpit view: 3:44 Change set points and reset points: 4:58 Additional Information: 5:47 ============================================== Missed our latest video? Catch up:    • How to install a sanitary point level switch      • How to install an industrial point level s...      • How to program an industrial point level s...   ============================================== To find more information about the LMT series sanitary level switch visit: Device configuration for the LMT level sensor: https://www.ifm.com/us/en/us/learn-mo... LMT Overview: https://www.ifm.com/us/en/us/learn-mo... LMT Product Selector: https://www.ifm.com/us/en/us/learn-mo... ============================================== Subscribe to ifm USA to receive notifications when new videos are posted. Create a my ifm account to conveniently access all of your order & software download information: https://www.ifm.com/us/en/shared/my-i... Follow us on LinkedIn 👉   / ifm-efector   Follow us on X 👉   / ifm_usa   Follow us on Facebook 👉   / ifmefector   Visit our website 👉 https://www.ifm.com/us/en #howtoifm #levelswitch #levelsensor #IOLink