Pilot Rc 1/5 F-16 Flight Review from Banana Hobby скачать в хорошем качестве

Pilot Rc 1/5 F-16 Flight Review from Banana Hobby

Pilot Rc 1/5 F-16 Fighting Falcon Flight Review Purchase Link: https://www.bananahobby.com/12-ch-pil... Full composite construction, lightweight and strong Two piece wing and two piece full flying stabiliser, both fully removeable Two piece wing and two piece full flying stabiliser, all for easy transport Easily detachable rudder for easy transport Two piece fuselage, with the split strategically placed to allow daily removal of tail section for easy transport to and from the flying field Easily detachable ventral fins, held in place with just two screws Painted outside the mold so no seam lines Specifications Wingspan2115mm (83.3in) Length3060mm (120.5in) Weight22.1kg (46.8 lb) with Vector Thrust pipe Included Hardware (ARF) Complete air frame (including fibreglass control horns)Carbon fibre wing-tubes, integrated into each wingServo extension leadsFixed Dual wall thrust pipe (for 200-320N turbines)Fuel tank (6600ml) and UAT (250ml)Pre-prepared pushrods with ball linksPre-glued control horns Optional Extras Pilot-RC electric retracts and electric brakes specific for this modelVector thrust pipe (Elevator and Rudder axis)1600ml smoke tankSmoke system (includes kevlar tank, smoke pump, injection pipe and fuel tubing)Scale cockpit (minus pilot) Required Hardware (ARF to RTF) Engine: 200-320NServos: (x9 + 2 optional) x5 super high torque (minimum 35kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder x4 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x3 for gear doors and x1 for steering +2 super high torque (minimum 35kg) if installing vector thrust pipe Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories Recommended Hardware Servos: Pilot-Rc PW48AH (48Kg – 0,10s at 8,4v)Servos: Pilot-Rc PW16AH (16Kg – 0,057s at 8,4v) Build Info Suggested SurfaceControl Throws Aileron45mm up / 45mm down – 30% Expo Elevator35mm up / 35mm down – 30% Expo (Measured from the front of the leading edge of the elevator) Rudder50mm left / 50mm right – 0-30% Expo Vector thrust if installedMaximum deflection – 50% Expo C/G 270mm from the front leading edge on the root of the wing Package & Build Options -ARF Complete air frame (including fibreglass control horns) Carbon fibre wing-tubes, integrated into each wing Servo extension leads Fixed Dual wall thrust pipe (for 200-320N turbines) Fuel tank (6600ml) and UAT (250ml) Pre-prepared pushrods with ball links Pre-glued control horns Required Landing Gear: Pilot-RC electric retracts and electric brakes specific for this model Required Engine: 200-320N Required Servos: (x9 + 2 optional) Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories -ARF PRO Complete air frame (including fibreglass control horns) Pilot-RC electric retracts and brakes with white-painted landing gears, specific to this model and equipped with installed gear doors Carbon fibre wing-tubes, integrated into each wing Servo extension leads Fixed Dual wall thrust pipe (for 200-320N turbines) Fuel tank (6600ml) and UAT (250ml) Pre-prepared pushrods with ball links Pre-glued control horns Required Engine: 200-320N Required Servos: (x9 + 2 optional) Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories -PNP (Turbine Ready) - Standard Version Complete air frame (including aluminium wing-tubes and fibreglass control horns) Pilot-RC electric retracts and brakes with white-painted landing gears, specific to this model and equipped with installed gear doors Servo extension leads Dual wall tail pipe (for 100-160N turbines) Kevlar fuel tank (4200ml) and UAT (250ml) Pre-prepared pushrods with ball links Pre-glued control horns 9X Pilot-RC high torque servos for (aileron/elevator/rudder/gear doors/steering) and extension wires, all pre-installed Required Engine: 200-320N Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories -PNP (Turbine Ready) - Pro Version Complete air frame (including aluminium wing-tubes and fibreglass control horns) Pilot-RC electric retracts and brakes with white-painted landing gears, specific to this model and equipped with installed gear doors Servo extension leads Dual wall tail pipe (for 100-160N turbines) Kevlar fuel tank (4200ml) and UAT (250ml) Pre-prepared pushrods with ball links Pre-glued control horns 9X Pilot-RC high torque servos for (aileron/elevator/rudder/gear doors/steering) and extension wires, all pre-installed Smoke system, navigation lights and cockpit set, all pre-installed Vector thrust pipe (pre-installed w/ servos) Scale cockpit (minus pilot) Required Engine: 200-320N Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories