Every Maker Should Have [Pt.41]...SMD LCR-Tweezers (MS8911) скачать в хорошем качестве

Every Maker Should Have [Pt.41]...SMD LCR-Tweezers (MS8911)

Product review and demo starts at 11:40. Introducing the MASTECH MS8911: A fully fledged SMD-LCR meter for measuring components in-circuit for around 40 Euros only! Support Roger on Patreon:   / kainkalabs   Availabe in Europe at Elektor-magazine: https://www.elektor.com/mastech-ms891... The poor man´s version of the "Smart Tweezers": http://www.smarttweezers.com/ Measurement voltage can be changed from 500mV-RMS to 100mV-RMS so that semiconductors in parallel to your component don´t turn on. Dual display (Q-factor/Dissipation factor), 100Hz...10kHz selectable test-frequency, auto-mode or manual L/C/ESR/DC-R selection, 6000 counts, 1.5...3% accuracy The downsides: 1.) The slotted tweezer-tips are totally crap. You have to replace them with sharp ones. Not easy or cheap to find! If you have a link for cheap replacement tips please post them in the comments! 2.) Last settings (especially test-frequency & test-voltage) are not stored after power-off 3.) Auto power-off time cannot be changed. Full specs: http://www.mastech-group.com/products... A useful complementary SMD-Tester with 4V diode test-voltage: MASTECH MS89119A: http://www.mastech-group.com/products...