How to install a touchless sensor tap from hansgrohe скачать в хорошем качестве

How to install a touchless sensor tap from hansgrohe

0:00 Intro 0:04 Product information 0:21 Content package & required tools 0:44 Installing the upper part of the mixer 1:34 Installing the lower part of the mixer 2:37 Temperature adjustment 4:03 Wash basin cleaning Here we show you step by step what to consider when installing a touchless washbasin fitting. The video shows this using the example of two hansgrohe electronic fittings with preset temperature and battery operation. See what you should know about the products shown and how to proceed with the installation. You can find much more about e-faucets on the hansgrohe brand website: https://www.hansgrohe.com. → 1. product information. Experience the installation of a touchless faucet using the example of electronic faucets from the Metris and Focus lines with battery operation for the washbasin, where the temperature is preset by the customer or the sanitary professional. → 2. scope of delivery and required tools. See here the supplied accessories for the installation of the non-contact electronic faucet: two backflow preventers, the housing with the battery and accessories for mounting and connection (fixing set). In addition, we show the tools you need. → 3. installation: upper part of the fitting. The electronic fitting can be installed quickly with common tools. To note: The non-contact faucet must not be placed too far from the sink edge and the sensor must not be covered by a backsplash or bead on the sink edge. Insert the shaft of the non-contact fitting with the loose hoses into the sink hole. We show how to fix the thread from below with a fixing ring, which is fixed with screws. → 4. installation: lower part of the electronic fitting. In the installation video, the following is about the concealed part of the non-contact fitting. First, the connections on the corner valves for cold and hot are mounted and connected to the flex hoses. Now you still need to connect the power supply for the electronic fitting. To do this, connect the low-voltage power cable that comes with the hoses from the e-fitting to the cable from the battery box. The light housing is glued to the wall. With the connection to the battery, the electronic sensor becomes active and automatically adjusts to the environment. To do this, allow a short waiting time before opening the water connections to the. → 6. sink cleaning. The automatic, electronic fitting should not become active for cleaning the washbasin; to do this, block the optical sensor for a few seconds. The non-contact fitting is then de-activated for about 60 seconds, and you can wipe the inside surfaces of the sink clean. ► More about hansgrohe bathroom faucets: https://www.hansgrohe.com Also follow us here: Facebook:   / hansgrohe   Instagram: https://www.instagram.de/hansgrohe Pinterest: https://www.pinterest.de/hansgrohe LinkedIn:   / hansgrohe-brand