AKJia 1/4" Body Size ISO 16028 Flat Face Quick Release Coupling скачать в хорошем качестве

AKJia 1/4" Body Size ISO 16028 Flat Face Quick Release Coupling

This is a set of 1/4 body size hydraulic flat face quick coupling, the flat face quick coupling is produced according to the ISO 16028 and is compatible with other series complying with the same standard. ISO 16028 standard is the international standard specifies the interface dimensions for interchangeability and specifies the performance requirements for hydraulic, flush-face type, quick action couplings. The coupling body size relates to the nominal inside diameter of the hose, usually the body size fits the hose size for the hydraulic applications. We recommend users to measure the diameter on the male part to check the body size to help you select the right quick coupling. On the drawing, the diameter B is easy to measure from the male part. From the male coupler we get the diameter is 20.16 mm, now we can find the dimensional requirement table, the diameter B is from 20.10 to 20.20 mm, so the body size of imperial is 6.3, and in inch is 1/4” Other dimensions is not necessary, but some special applications, you may need to check sometimes. The details you can inquire our customer support to get help. The next important thing is the threads, the thread is used for connecting the quick couplings to the hose and the machinery. The default threads are usually NPT or BSPP for different countries. Also other threads can be custom produced, like JIC, SAE etc. Performance requirements for flat face quick couplings. ISO 16028 standard had listed the performance requirements for rated pressure, burst pressure, Rated flow and so on for carbon steel material body quick couplings, and our quick couplings reach or exceed the performance requirements. How to use the flat face quick coupling? The threads are used to connect to the hose thread or the machine, use a thread sealant, lubricant, or a combination of both when assembling pipe thread joints in quick action couplings. Just push the coupling when the quick coupling aligned, the quick coupling will connect. And pull the sleeve on the female part, the coupling will disconnect. There is a lock, when rotate the sleeve the lock ball out of the groove, the sleeve cannot reach the release position, the coupling cannot be disconnected. And rotate the sleeve when the lock ball at the groove position, the coupling can be disconnected by pulling the sleeve. https://www.akjiainc.com/product/1-4-...