How to Replace Rear Brake Caliper 2006-2011 Cadillac DTS скачать в хорошем качестве

How to Replace Rear Brake Caliper 2006-2011 Cadillac DTS

Buy Now! New Brake Caliper from 1AAuto.com https://trq.video/ia-1ABCR00567 New Brake Caliper from 1AAuto.com https://trq.video/ia-1ABCR00568 New Brake Caliper Set from 1AAuto.com https://trq.video/ia-1ABCS00274 A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle. This video shows you how to replace a rear brake caliper on your 2006-2011 Cadillac DTS. This repair was done on a 2010 Cadillac DTS Platinum 4.6L and the process should be similar on the following vehicles: 2006 Cadillac DTS 2007 Cadillac DTS 2008 Cadillac DTS 2009 Cadillac DTS 2010 Cadillac DTS 2011 Cadillac DTS Tools you will need: • 11mm Wrench • 14mm Wrench • 11mm Socket • 13mm Socket • 14mm Socket • 15mm Socket • 19mm Socket • 3/8 Inch Impact Gun • Torque Wrench https://trq.video/omL-1AXAA00044 • Gloves https://trq.video/ocg-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Cadillac DTS 2006-2011 1st Generation:    • Cadillac DTS 2006-2011 1st Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.