Voron V2.4r2 Real Time PRINT_START with klicky, auto z, and KAMP скачать в хорошем качестве

Voron V2.4r2 Real Time PRINT_START with klicky, auto z, and KAMP

Real time video of my PRINT_START routine on my Voron V2.4r2. Full mods list will be provided in a later video. The video starts toward the end of step 3, since watching steps 1-3 would be pretty boring. I have not implemented LED color changes for different phases, but that is easy and is planned for the future. Major things seen: Use of KlickyNG probe for all bed probing steps. Automatic Z calibration, which sets the Z offset height automatically by measuring the nozzle length, probe offset, and bed offset. This allows you to switch nozzles or PEI sheets without redoing Z offset calibration with some paper. KAMP (Klipper Adaptive Meshing Purging) determines the area used for printing and only meshes that area instead of the entire bed. Huge time saver! This mod also includes adaptive purging, which I have not implemented since I prefer to purge in the bucket. Decontaminator Mod, is a purge bucket and brush mod for purging filament and cleaning the nozzle with a brush. The mod originally calls for a brass bristle brush, but I have swapped in a silicone bristle brush to prevent electrical shorts. The silicone brush also cleans very well and doesn't seem to show any wear that a brass bristle brush would. PRINT_START steps: 1) Heat bed to temp, center toolhead above bed and turn on all fans including part cooling. 2) Wait for chamber temperature to reach 55C. 3) Wait for frame temperature to reach 40C. 4) Grab KlickyNG probe and perform a Quad Gantry Leveling. 5) Dock the probe and heat hotend and clean the nozzle without purging. 6) Home Z 7) Grab KlickyNG probe and perform automatic Z calibration. 8) Immediately begin adaptive mesh probing (i.e., KAMP) 9) Dock the probe and heat hotend to printing temperature to purge and clean the nozzle. 10) Begin the print.