JB Racks Garage Stand Assembly скачать в хорошем качестве

JB Racks Garage Stand Assembly

0:00 Intro 0:06 Inventory 0:18 Start Assembly 0:40 Hitch Plate and Back Bar 1:20 Front Bar Installation to the Hitch Plate 2:21 Tighten Hitch Plate Bolts 2:50 Front Bar Leg Installation 3:42 Wheel Installation 4:21 End Cap Installation 4:28 Rack Tension Knob 0:00 Let’s start assembling the Shed Stand. 0:06 The first thing to do is to lay everything out and ensure you have all the necessary parts. 0:18 Now, we can assemble the Shed Stand. 0:40 Look for the large plate with the 2” hitch receiver on it (Photo). You will also need the flat metal plate and the back bar for this step (Photos). Make sure you have two bolts, four washers, and two locking nuts. 1:20 Next, we will install the front legs. Use the two square tubes that do not have the indentation at the end; these will slide into the hitch plate. You will need four bolts, eight washers, and four locking nuts for this step (Photo of the square tubing front leg). 2:21 After installing the front legs, you are ready to tighten all the bolts on the hitch plate. 2:50 You are now ready to install the front leg extensions. You will need four bolts, eight washers, and four locking nuts for this step. 3:42 With the Shed Stand base complete, you can now install the four wheels at the end of each leg. 4:21 After installing the wheels, we can move on to the end caps, which will be pushed into the end of each leg (Photo). 4:28 Lastly, install