Honda Xr650l Sprocket Upgrade To XR650R AVOID Stripping Your Output Shaft скачать в хорошем качестве

Honda Xr650l Sprocket Upgrade To XR650R AVOID Stripping Your Output Shaft

Honda Xr650l Sprocket Upgrade To XR650R AVOID Stripping Your Output Shaft. Make sure and check this part that is easily overlooked . Check before it is too late and you have to replace the entire shaft ! I upgraded my sprocket to a xr650r sprocket . The splines are the same size , but the area inside the sprocket grabs almost double the area on the shaft as the stock xr650l sprocket . Mine actually stopped working , it stripped out and the sprocket almost came off while riding . The only teeth left on the shaft were some just close to the very inside of the shaft closest to the motor . The xr650r sprocket grabs those last few teeth now . I welded a nut for a keeper inside the shaft. And I put a washer inside the groove where the clip used to go to retain the sprocket and used one of the keeper bolt holes to secure the washer . Then I smashed the outside washer over the top to hold it down from backing out at all . I used red loctite also . It has been several thousand miles of riding after this repair and it is working great ! More great videos here 👉   • Motorcycles