Configuring an External Radio - LandStar 8 - PQS Tech Support скачать в хорошем качестве

Configuring an External Radio - LandStar 8 - PQS Tech Support

📻 Using an External Radio with your Rover When your built-in internal radio isn't enough, or you’re using a high-power external radio for long-range work, you need to tell LandStar 8 how to find the signal. In this video, we show you how to configure your Rover to accept RTK corrections from an External Radio data link. 📺 In this video: Data Link Selection: Switching your Rover’s work mode from ‘Internal Radio’ to ‘External Radio’ (or ‘Controller Radio’ depending on your kit). Cable & Bluetooth Connections: How to ensure your external radio hardware is correctly interfaced with the controller or the receiver via the LEMO or RS232 ports. Baud Rate Matching: Synchronising the communication speed (Baud Rate) between the radio and the LandStar 8 software to prevent data corruption. Protocol & Frequency: Matching the settings of the external transmitter—ensuring your Rover is "listening" for the correct message format (like RTCM3 or CMR). Signal Monitoring: How to use the status bar to verify the data packets are arriving and your "Age of Correction" is staying low. 💬 Are you using a high-power 35W external radio for large-scale topographic work, or do you only break it out for the toughest terrain? Let us know in the comments! Don't forget to Like and Subscribe for more CHCNAV tips and surveying tutorials. #CHCNAV #LandStar8 #ExternalRadio #GNSS #RTK #Surveying #LandSurveying #SiteEngineering #Geospatial