У нас вы можете посмотреть бесплатно GGGIILLAAAA ‼️1400 KG BUAT TEST ACCOMODATION LADDER ⁉️ BERHASIL ATAU GAGAL ⁉️ или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
The accommodation ladder is a one point access to ship’s deck for shore personal, port lashing/cargo crew and seafarers Checks and Surveys: Following are annual checks which needs to be performed as per SOLAS regulations I/7 and I/8 on accommodation ladder: 1. steps 2. platforms 3. All support points such as pivots, rollers, etc. 4. All suspension points such as lugs, brackets, etc. 5. Stanchions, rigid handrails, hand ropes and turntables 6. Davit structure, wire and sheaves, etc. and 7. Any other relevant provisions stated in these guidelines On gangway: 1. Treads 2. Side stringers, cross-members, decking, deck plates, etc. 3. All support points such as wheel, roller, etc. 4. Stanchions, rigid handrails, hand ropes 5. Any other relevant provisions stated in these guidelines Annual surveys required for winch: 1. Survey of brake mechanism including condition of brake pads and band brake, if fitted 2. Survey of remote control system 3. Survey of power supply system (motor) The Five Yearly survey will include operational test with the specified maximum operational load of of accommodation ladder and gangway winch. The load used for the test should be: 1. The design load, or 2. The maximum operational load, if this is less than the design load and marked, or 3. The load nominated by the shipowner or operator only in those cases where the design load or maximum operational load is not known (e.g., for accommodation ladders or gangways which are provided on board ships constructed prior to 1 January 2010), in which case that nominated load should be used as the maximum operational load for all purposes The tests should be carried out with the load applied as uniformly as possible along the length of the accommodation ladder or gangway, at an angle of inclination corresponding to the maximum bending moment on the accommodation ladder or gangway.