How to fix bike freewheel. Pedals turn, but bike doesn't move. скачать в хорошем качестве

How to fix bike freewheel. Pedals turn, but bike doesn't move.

Hello cyclists! In this video tutorial, we'll see how to fix bike freewheel. The pedals turn, but the bike doesn't move. This may be due to a broken freewheel. Remove the wheel from the bike. Remove the freewheel. Use the long arm to easily remove the freewheel. The freewheel loves to cook and will not uncoil. Watch this video to the end and you will learn all the nuances of bike repair and freewheel. Subscribe and like the channel. To facilitate the freewheeling, be sure to treat the cap with a special fluid. Disassemble the ratchet. Start turning the freewheel clockwise. We see rust and a lot of dirt inside. We disassemble the freewheel completely to clean it, wash it, degrease it, lubricate it and reassemble it. We use a magnet to quickly collect all the balls. We have the top row, now the bottom row. As you can see, the teeth are sealed, full of dirt. This prevents the freewheel from working properly. Clean the dirt off the freewheel. Why does the bike not move? The spring isn't working. The freewheel won't engage. Clean the inside of the freewheel. Lubricate the seats and install the spring. There should not be thick grease in these places, otherwise everything will repeat itself. Apply some liquid lubricant. This is how we serve the freewheel workshop. It is essential to clean the freewheel thoroughly before reassembly. Then apply the right lubricant. We start with a thick layer of grease where the balls fit. Service bicycle freewheel. For grease, the balls stick like glue. Balls inside the freewheel. This keeps the balls from scattering all over the shop. Do the same with the top row of balls. Lubricate the top cup. We put the balls to sleep. See how they do it in a workshop. Little trick. How to refill balls quickly and easily. Freewheel assembly. We turn the freewheel counterclockwise. Works perfectly, like new. For additional moisture protection, we lubricate the canyon. Put a ratchet on the wheel. Tighten the freewheel again. We use no special tools. Just a regular screw and a hammer. Like this secret). Be sure to subscribe to the channel Don't miss out on interesting releases. Putting the wheel on the bike. Testing the bike. Everything works! Thanks for watching! Rate videos you like. Ask questions in the comments. #freewheel #bicycle #tutorial 00:00 Video tutorial on how to fix bike freewheel 00:17 Pedals turning, but bike not moving 00:36 Remove wheel from bike 01:01 removing the mf-tz500 freewheel 02:01 Disassembling the ratchet 03:30 removing dirt from the freewheel 03:48 why is the bike not moving? 04:13 bike freewheel inside 05:47 bike freewheel service tournament mf-tz500 06:04 balls inside freewheel shimano 06:52 assembly freewheel shimano mf-tz500 07:37 putting the ratchet on the wheel 08:14 Putting the wheel on the bike 08:26 Testing the bike 🆗🎥🚲 Write in the comments, what you would like me to do in the new video. ❓❔❓ Ask your questions in the comments 👇👇👇