How to fix Canon Pixma MX922 Error B200 (Unclogging the printhead) скачать в хорошем качестве

How to fix Canon Pixma MX922 Error B200 (Unclogging the printhead)

This is the process I found very effective. Ask me any question if you have. Also, I found out that there is a possibility that the printer will print blank. In this case. Check your wifi connection. 1. Wash off the printhead through running hot water. 2. Use straw to blow each ink holes and outlets. 3. Fill a container just a little above the ink holes with Rubbing Alcohol (50%). Then squeeze with Windex glass cleaner 4x. Mix the solution. Use a plastic container with lid so the solution will not evaporate. 4. Soak overnight. 5. Get a straw that will fits the ink holes and start blowing the ink off. Do this from time to time with the solution. 6. After about 24 hours. Wash off the printhead with running hot water. Try to blow it more while rinsing with hot water. Place in a container and soak with warm water for another 12 hours blowing the holes from time to time until the clean water is clear of ink. 7. Rinse thoroughly and wipe gently with clean paper towel. 8. Once the printhead dried thoroughly, it is now ready install it back into the printer.