How to Replace Front Lower Control Arm 2000-2005 Buick LeSabre скачать в хорошем качестве

How to Replace Front Lower Control Arm 2000-2005 Buick LeSabre

Buy Now! New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00185 Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2000-2005 Buick LeSabre. This repair was done on a 2004 Buick LeSabre Limited 3.8L and the process should be similar on the following vehicles: 2000 Buick LeSabre 2001 Buick LeSabre 2002 Buick LeSabre 2003 Buick LeSabre 2004 Buick LeSabre 2005 Buick LeSabre Tools you will need: • Pry Bar https://trq.video/ofL-1AXAA00020 • 14mm Wrench https://trq.video/ofN-1AXAA00010 • 18mm Wrench • 14mm Socket https://trq.video/ous-1AXAA00015 • 7mm Socket https://trq.video/ore-1AXAA00017 • Pickle Fork • Needle nose pliers https://trq.video/odb-1AXAA00051 • Needle nose pliers https://trq.video/odb-1AXAA00052 • 1/2 Inch Impact Gun https://trq.video/obB-1AXAA00252 • 3/8 Inch Impact Gun • Ratchet https://trq.video/owb-1AXAA00016 • Torque Wrench https://trq.video/onw-1AXAA00044 • Cloth Rags https://trq.video/odg-1AXSS00035 • Hammer • Rubber Mallet Subscribe:    / @trq   Check out our playlist: Buick LeSabre 8th Gen 2000-2005:    • Buick LeSabre 8th Gen 2000-2005   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.