How to Make a Shot Put Ring | CHEAP | Under $100 скачать в хорошем качестве

How to Make a Shot Put Ring | CHEAP | Under $100

This is how I made a cheap shot put ring for under $100. Materials (you can buy on Amazon or at local hardware store) 4x8 Plywood Jigsaw Liquid Nails Caulk Gun 1” Screws Drill Measuring Tape Quick Tutorial 1. Buy Materials 2. Cut 1 Sheet of Plywood into 8 Segments Each 1 Foot Long 3. Cut Segments to make Toeboard Arc 4. Glue/Screw 6-7 Segments for Toeboard (depends on thickness of plywood) 5. Glue/Screw 1 Segment for Back of the Ring Additional Suggestions 1. Buy Plywood with a Thickness of more than 1/2 inch, but less than 3/4 inch 2. Use 1 Inch Screws for First Layer of Toeboard, but 1.25 Inch Screws for Rest 3. Alternate Positions of Screws Every Layer 4. Sand All Edges of Plywood 5. Paint Toeboard I had most of the tools already so it actually only cost me about $60. Follow @throwrightfarhappens on instagram and twitter... 📸   / throwrightf.  . 🐦  / throwright   #ShotPutRing #Cheap #Toeboard