How to install Smart Tint PDLC Film - Non adhesive mechanical installation скачать в хорошем качестве

How to install Smart Tint PDLC Film - Non adhesive mechanical installation

Smart Tint is the next generation in switchable privacy glass. Go to www.SmartTint.com for more info. http://www.SmartTint.com provides complete DIY kits that are dimmable , trimable , remote controllable and wifi capable. Smart Tint is available in black , grey , white , blue , green , yellow and red. (This is designed for a mechanical install using a clear 3m VHB double sided tape) For BEST PERFORMANCE please follow these quick tips: DO NOT store material in shipping container or drum for more than 14 days. DO NOT exceed 120 vac +/ 10vac -Provide a clean and dust free work environment -Confirm that mounting surface is oil and residue free prior to installation. -Clean the surface you are applying the material to with 91% isopropyl alcohol ONLY or greater. -Remove the protective coating from the contact side of the material prior to installation of the Non-Adhesive film and clean the actual Smart Tint and the glass with 91% isopropyl alcohol only. -Acclimate the Smart Cling Self Adhesive material or the NON-Adhesive product to room temperature before installation and wait 24-48 hours after installation is completed for best results. (This will allow for the Smart Cling Self Adhesive material to out gas and adhere to the surface) - -We provide a ready to install piece of material that is pre cut to the measurements or template you provide us. Double check your measurements and templates. All cuts are final. -Dry fit all material prior to installation. -Remove the protective film that is on the finish side after the film has been installed.