1 Channel DC12V Remote Control Switch QIACHIP KR1201 скачать в хорошем качестве

1 Channel DC12V Remote Control Switch QIACHIP KR1201

Newly made videos:    • How to use remote control switch, DC12V, w...   433Mhz Universal Wireless Remote Control Switch DC12V 10A 1CH relay Receiver Module and RF Transmitter 433 Mhz Remote Controls From: https://www.aliexpress.com/store/prod... Working mode: Momentary, Toggle, Latching About Working mode: Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects. Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically . Clearing the code : Push the learning button on the receivers for 8 times , the codes will be cleaned . After clearning the code, all the remote control cannot work any more. Learning the code :(momentary) Push the learning key on the receiver once time , it comes into momentary setting mode . Wait for a moment , the LED will be off , it comes into learning state . Push the remote button , LED indicator on the receiver board will flash then come off . After 3 seconds, the LED indicator will be on again , learning successfully . Learning the code : ( Toggle ) Push the learning key on the receiver twice time , it comes into toggle setting mode Wait for a moment , the LED will be off , it comes into learning state . Push the remote button,LED indicator on the receiver board will flash then come off. After 3 seconds , the LED indicator will be on again , learning successfully . Learning the code :( Latching ) Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF". For example : button A = ON , button B = OFF Push the learning key on the receiver triple time , it comes into latching mode . Wait for a moment , the LED indicator on the receiver board will flash then come off. Push the remote button A . LED flash for 5 times . Push the remote button B . Led flash for 5 times . After 3 seconds , the LED indicator will be on again , learning successfully. A = ON , B = OFF . Learning the code :( Time delay mode ) Push the learning key on the receiver forth time , the time dealy for 5 seconds . Push the learning key on the receiver fifth time , the time delay for 10 seconds . Push the learning key on the receiver sixth time , the time delay for 15 seconds . The LED indicator will be off . Push the remote button , LED flashes and off . After 3 seconds , the LED indicator will be on again , learning successfully .