Nerta Active Diamond – Product Information & Walkthrough скачать в хорошем качестве

Nerta Active Diamond – Product Information & Walkthrough

Nerta's Active Diamond (Available in 5L 25L, 200L and 1000L) Active Diamond is a high pH multipurpose touchless cleaner ideal for heavy-duty cleaning of road grime from cars, trucks, earthmoving gear, and agricultural equipment. It will provide between a 90% and 95% touchless clean. Application Instructions: Apply a thin layer of foam over a dry vehicle and allow to dwell for around 1 minute. Using high-pressure water start cleaning from the bottom to the top, or backwards into fresh soap, covering all areas. Rinse any excess soap from the top to the bottom. This product is safe on all paints, stainless steel and chrome. Do not use on mirror polished aluminium as this product may leave a white veil or streak the aluminium. Care should be taken if using on ceramic coating, please refer to the vehicle manufacturer's guidelines BEFORE applying the product. It is recommended to test all products on a small inconspicuous area before use. Avoid letting the product dry on the vehicle. Should this happen please re-foam to reactivate the soap and wash off as per the above instructions. Avoid applying the soap on hot surfaces. This is due to the foam consisting largely of water and on contact with a hot surface, the water in the foam will evaporate leaving the product adhered to the surface. Should this happen, re-foam to reactivate the soap and wash off as per the above instructions. Due to Australian weather conditions, if application of the product in hot conditions cannot be avoided, it is suggested to apply in sections using the above application technique.