Mazda 3 BM 2016 Front Camera Installation скачать в хорошем качестве

Mazda 3 BM 2016 Front Camera Installation

The MX5 Things FC4 Front / Rear Camera switch is designed for switching between the front and the backup cameras. The FC4 module is a multifunctional controller, operating on CAN bus. Video covers how to install a front camera in the Mazda Emblem. Routing RCA Video wire and 12 power cable to the camera. Taking the infotainment screen out and routing the wire harness for the kit in the dashboard. WARNING, this is a hard job to do as it requires taking the front bumper off, cutting plastics, taking the center console and dashboard apparat. Video on how to take the front bumper off and install front parking sensors here:    • Mazda 3 BM 3rd Gen 2014 - 2018 Front Parki...   Check out how to install Automatic power window and folding module on the Mazda 3 here:    • Mazda 3 BM 3rd Gen 2016 Automatic Folding ...   The FC4 switch provides: 12V power for the front camera. Switching between the front and rear camera when activating the front camera. Ability to use the touchscreen while in motion. Turn signal timer alarm. Kit was originally designed for the Mazda MX-5 by MX5things, however it can be used on the Mazda 3 BM (car in the video is from 2016) as it uses the same Infotainment screen. Front / Rear Camera Switch can be purchased from here: https://bit.ly/4iLQNqC Installation guide, setup and configuration (Windows drivers and how to install) available on the MX5things website here: https://bit.ly/3EAH7kL Configuration software for Microsoft Windows available here: https://bit.ly/4lXhxaf Camera that was used was purchased from Aliexpress. Dimensions of the camera assembly so it can fit in the Mazda emblem are the following: 82mm width x 38 mm height x 51mm across. You will have to see what video signal works with your car. CVBS or AHD (NTSC or PAL) Specifications of the camera used are the following: Color: Black Power supply: DC 12 V Camera angle: 140° Lens materials: 100% Glass Signal Format: NTSC or PAL Operation temperature: -40°C to +80°C (-40°F to 176°F) Video Color: Color Waterproof grade: IP68 Material: ABS plastic CVBS:1080x720P (NTSC) AHD: 1920x1080P (PAL) or 1280x720P (NTSC) Video Output: AHD Video Signal or CVBS Video Signal Tools required for installation are: Philips screwdriver Plastic trim removal tool Socket set