Hightop Install//Step by Step скачать в хорошем качестве

Hightop Install//Step by Step

Step by step video on how I installed my Coast Mountain Hightop on my VW vanagon. I used 3m 5200 adhesive to attach the fiberglass top to the sheetmetal of my van. This was something I was nervous about, there's a bunch of different ways to attach these and different adhesives you can use, but 5200 is something I'm familiar with and I know how strong it is, so I went for it. It's holding fine 1,000's of miles later. I did grind the paint off down to the metal/factory primer in several spots, I was worried the paint would be the weak link and wanted a secure hold. DO NOT USE 5200 FAST CURE, it dries too fast and you will not have time to finish everything. Get the normal tube, it takes 7 days to Fully cure, a thin layer dries to the touch in about a day, take your time and get it all straight and square. I still really like how I cut my roof and would use the dimensions mentioned in this video if I was to do it again. I also love how my stainless trim I made is holding up. It's strong and it doesnt flex when I climb up, it can take a beating, and it still looks good. It will last forever. I had 4 roof racks/bars and 2 roof boxes on the top of my van before installing this hightop. With this hightop it seems to cut through the air better at highway speeds and have less wind resistance, even though it's taller and bigger, it is just a lot more aerodynamic now. I went with the coast mountain hightop because they look the best and still have the height I needed to stand up 100%. Its holding up great and wouldn't hesitate to buy another.