💎 How To Connect Gotv GoCoda 1 To Tv Set скачать в хорошем качестве

💎 How To Connect Gotv GoCoda 1 To Tv Set

How To Connect Gotv GoCoda 1 To Tv Set To connect your GoTV decoder to your TV, you need an AV cable (also known as RCA or composite cable) which should be included in the decoder's package. Here are the steps to follow: Check that you have all the components needed to connect the GoTV decoder to the TV. You will need the GoTV decoder, an AV cable, and your TV. Locate the AV output port on the back of the GoTV decoder. The AV output port is usually colored yellow, white, and red. Plug one end of the AV cable into the AV output port on the GoTV decoder. The colors of the plugs should match the colors of the ports; the yellow plug goes into the yellow port, the white plug goes into the white port, and the red plug goes into the red port. Locate the AV input ports on your TV. These ports are usually located at the back or side of the TV and are also colored yellow, white, and red. Plug the other end of the AV cable into the AV input ports on your TV. Again, ensure that you match the colors of the plugs with the corresponding colors of the ports. Turn on your TV and switch to the AV input channel to which you connected the GoTV decoder. You may need to consult your TV manual to know how to switch to the AV input channel. The GoTV decoder will start scanning for channels automatically. This process may take a few minutes. Once the channel scan is complete, you can start watching TV by using the GoTV remote control to navigate the menu and change channels To install a GoTV decoder, follow these steps: Unpack the contents of the GoTV decoder box and ensure that you have all the necessary components. These include the decoder, remote control, power cable, and AV cable. Connect the AV cable to the back of the GoTV decoder. The AV cable has three colored plugs; yellow, white, and red. Connect the yellow plug to the yellow port on the decoder, the white plug to the white port, and the red plug to the red port. Connect the other end of the AV cable to your TV. Your TV should have corresponding ports for the yellow, white, and red plugs. Ensure that you connect the yellow plug to the yellow port, the white plug to the white port, and the red plug to the red port. Connect the power cable to the back of the GoTV decoder, and plug the other end into an electrical outlet. Turn on your TV and switch to the AV input channel to which you connected the GoTV decoder. You should see a welcome message on the screen. Follow the on-screen instructions to activate your GoTV decoder. You will need to have your IUC number, which is found on the red sticker at the bottom of the decoder, and your mobile phone number. After activation, your GoTV decoder will start scanning for channels. This may take a few minutes. Once the scan is complete, you can start watching TV. Use the remote control to navigate the GoTV menu and change channels. The remote control should work automatically, but if it doesn't, try pressing the "TV" button at the top of the remote control to switch it into TV mode. ____________________________________ LINKS WEBSITE: https://www.pbteck.com INSTAGRAM;   / pbtecknology   FACEBOOK;   / pbtecknology   TWITTER   / pbtecknology   TELEGRAM: https://t.me/pbtecknology #pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #free