3D Printed Stackable 3.5 Inch Hard Disk Drive and 120 Fan Mount Enclosure with feet скачать в хорошем качестве

3D Printed Stackable 3.5 Inch Hard Disk Drive and 120 Fan Mount Enclosure with feet

Files available here: https://www.etsy.com/uk/listing/14659... Get my DIGITAL FILES https://www.etsy.com/shop/tmprojection Get my STUFF https://www.ebay.co.uk/sch/tmprojecti... KM601s digital multimeter: https://kaiweets.com/en-gb/products/k... 15% off code: 15TMP All my LINKS https://www.tmprojection.com/links   / tmprojection     / tmprojection     / tmprojection   Stackable 3.5 Inch Hard Disk Drive and 120 Fan Mount Enclosure with feet For 3.5 Inch Drives (101.6 x 146 x 25.4mm) I used 5 x WD100EFAX to design and test these mounts A 120 x 120 x 25mm Fan can be mounted every 4 or 5 drives If you add a fan every 5 drives there will be a 13mm gap between every fan If you mount a fan every 4 drives there will be no gap between the fans what so ever You will need: HDD's themselves 120 x 120 x 25mm Fans M3 Hex Allen Key 4 x 6/32 HDD screws per drive https://www.ebay.co.uk/itm/324460933564 4 x M3 Square Nuts (5.4 x 5.4 x 1.6mm) per fan https://www.ebay.co.uk/itm/383710131729 4 x M3 18mm total length (16mm thread + 2mm head) 5.7mm diameter head, counter sunk screws per fan https://www.ebay.co.uk/itm/122324475706 PLEASE NOTE, IN THE IMAGES ATTACHED, I USED BUSHING AS SPACERS FOR THE FANS SO THAT THEY DO NOT TOUCH THE DRIVES SINCE THEN I HAVE SIMPLY EXTENDED THE MOUNTING PIECES BY 5.4MM (THE SIZE OF THE BUSHINGS) SO THAT THE BUSHINGS ARENT NEEDED MAKING EASIER TO MOUNT THE FANS