Making A Wood Lathe Stand скачать в хорошем качестве

Making A Wood Lathe Stand

00:03 I skipped the bit about cutting the pieces or making the loose tenons instead starting with routering a channel for the side panels. 01:00 Dry fitting the side panels. 01:30 Gluing the side panels. 02:19 I am going to secure the side panels to a base piece using carriage screws which I am cutting out. 02:51 Pocket screwing the base, which will be strengthen with a panel glued on top. 03:34 Attaching the bottom section to side panels. 04:23 Cutting sheet material for base and installing. 05:02 Making top section – back angle of stand is 10 degrees. 05:18 I decided to use my V-nail gun to attach the top pieces together. I didn’t have a piece long enough so I also joined these together - trying to use all the scrap from around the workshop. 05:56 Fitting top to side panels. 06:10 I didn’t plane any timber down instead selecting the straightest pieces I could fine and orienting them to they would compensate for any slight warping. 06:30 Top sheet material. 07:01 Routering groove for back panel to slot into. 07:53 Cannibalising the workshop for material. 08:18 The glorious moment it all came together. 08:37 CONCLUSION 08:85 T-Shirts 09:20 But which one? 09:22 Disclaimer from the thumber. I'll provide a sketch up model with the next video. Subscribe Here: https://goo.gl/u1jZSq Wood Lathe Playlist:    • Wood Lathe   Instagram:   / savvas_papasavva   New Channel:    / educatingsavvas   Website: http://www.miscpro.com