Cabrinha Kite and Wing Replacement Valve Installation | Super Easy Fix! скачать в хорошем качестве

Cabrinha Kite and Wing Replacement Valve Installation | Super Easy Fix!

In this detailed tutorial, Jimmy and Aaron from MACkiteboarding guide viewers through the process of replacing an inflation valve on a Cabrinha wing or kite. They begin by emphasizing that while the task may initially seem daunting, it's actually quite straightforward once you understand the steps involved. The replacement process is the same for both wings and kites, so the information is broadly applicable. Key Tools and Materials Valve Replacement Kit: The necessary replacement valve. Bladder Stabilizing Tools: Jimmy and Aaron use a custom-made padded cutting board and clamps to stabilize the bladder and valve during the replacement process. They also suggest DIY alternatives like using a piece of cardboard or a household cutting board if specialized tools aren't available. Sharp Blade: A sharp cutting tool, like an X-Acto knife or razor blade, is essential for making clean, precise cuts. Alcohol and Cloth: Rubbing alcohol is used to clean the area around the valve, ensuring a strong adhesive bond. A cloth is used to wipe away any debris or residue. Step-by-Step Process 1. Preparation: Start by laying out the wing or kite and identifying the valve that needs replacing. Open the access point by undoing the Velcro and zipper. This will expose the bladder, which is secured by Velcro on both sides. 2. Removing the Valve: Carefully separate the Velcro around the valve and gently pull the bladder out. This may require some effort, but the bladder material is resilient. The key is to avoid tearing it by pulling evenly and smoothly. 3. Stabilizing the Bladder: Once the bladder is exposed, use the padded board and clamps (or your DIY alternatives) to lay the bladder flat, ensuring the valve area is centered and smooth. This step is crucial for achieving a successful valve replacement. 4. Cutting the Old Valve: Using a sharp blade, carefully cut around the old valve as close to the adhesive line as possible. This requires precision, but taking your time will ensure a clean removal. 5. Cleaning the Area: Clean the area around the cut with rubbing alcohol to remove any talcum powder or residue that could interfere with the adhesive of the new valve. Allow the area to dry completely. 6. Applying the New Valve: Peel the backing off the new valve, being careful not to touch the adhesive surface. Align the new valve over the existing hole and press it down firmly, working from the center outward to avoid air bubbles and wrinkles. 7. Reassembling the Wing or Kite: After securing the new valve, remove the stabilizing board and clamps, then carefully insert the bladder back into its sleeve. Reattach the Velcro, ensuring it is smooth and secure, and close the zipper. 8. Final Check: Once everything is reassembled, double-check that the valve is properly aligned and securely attached. Fold the wing or kite as usual, and it's ready for use. Thank you for sharing the kiteboarding and wing foiling stoke with us! 🤙🏽 Please join us in the comments section and get a conversation started. We’re always happy to help! 🔥 LIKES and SUBS are like online BRO-HUGS! 🔥 https://www.mackiteboarding.com P | 800.622.4655 E | mailto:[email protected] Live Chat: https://messenger.providesupport.com/... MACkite Blog and Knowledge Center: https://www.mackiteboarding.com/news/ https://www.mackiteboarding.com/kiteb...