Boyu How to Disassemble,Assemble Screw ? (Screw Disassembly,Assembly Method) скачать в хорошем качестве

Boyu How to Disassemble,Assemble Screw ? (Screw Disassembly,Assembly Method)

In this video, you can see the method of Screw Disassembly,Assembly in detail (SPC Floor Production line). Procedure： 1、Use a crane to lift up the mould 2、Dismantle the connecting flange for the confluence core 3、Move away the mould without rotation 4、Disassemble both the heating control line and the temperature sensor of the confluence core 5、Remove the confluence core 6、Turn on the motor of the main machine 7、Disassemble the feeding device and the circulating cooling water pipe 8、Dismantle the discharging port of the feeding device 9、Dismantle the connecting block 10、Loosen the large connecting nut 11、Dismantle the fixing seat for the cooling fan 12、Remove the metal hose for vacuuming 13、Rotate the machine barrel front-to-back adjusting handwheel clockwise 14、Use a crane to move out the machine barrel with rotation until the passing-in/-out of the screw is not affected 15、Remove the fixing block to prevent the screw from falling back 16、Pull the screw out of the machine barrel slightly 17、After having pulled out the screw by 1/3 of its length and having separated two pieces of screws completely 18、Clean up the materials 19、Install the screw into the machine barrel by 2/3 of its length 20、Install the gasket for gap adjustment 21、Mount the fixing block 22、Move the machine barrel with rotation 23、Tighten the big connecting nut 24、Observe with a dial indicator 25、Mount both the discharging port of the feeding device 26、Install the feeding device 27、Install the metal hose for vacuuming 28、Mount the fixing seat for the cooling fan 29、Install the confluence core 30、While locking these screws use a copper to tap the connecting block Website: https://www.boyuextruder.com/ PHONE: +86-13771559988 E-MAIL: [email protected] ADD: No.188-6, xigan Road, Fangqian, Xinwu District, Wuxi, Jiangsu, China