How to Tension an Encoder on an NTM Rollforming Machine скачать в хорошем качестве

How to Tension an Encoder on an NTM Rollforming Machine

How do you adjust the encoder so it is properly tensioned on NTM machines? ********************************** This video covers how to ensure the encoder is properly tensioned and making consistent contact with material as it goes through the machine. The location of the encoder varies between machines, but the adjustment process is the same. Note that new SSQ II machines come with a self-tensioned encoder. If by chance we didn't answer your question in this video, you can contact us here: https://hubs.ly/H0f817Z0 ********************************** FOLLOW THE NEW TECH MACHINERY TEAM ►  / new-tech-machinery   ►  / ntmmazzella   Visit Our Website: https://hubs.ly/H0f82Sn0 Subscribe To Our Blog: https://hubs.ly/H0f82T00 Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury. New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.