У нас вы можете посмотреть бесплатно Kickout Flashing - Tricky/Fascia/Gutter Wall Junction (v2) или скачать в максимальном доступном качестве, которое было загружено на ютуб. Для скачивания выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Kickout Flashing - Tricky Fascia/Gutter/Wall Junction Fascia and barge board junctions are common causes of water entry. Often this is due to these junctions relying heavily on sealant and the junctions lacking robust kick-out flashings, back flashings or transition tray flashings. Back flashings or transition tray flashings should be installed to bridge the gap at the end of the fascia board to protect the soffit framing. Some cladding manufacturers have performed flashings for these junctions. Back flashings provide additional protection to apron kickout cladding penetrations/junctions. Detailing these junctions in a 3D step-by-step construction format provides clarity to the builder and fabricator. Disclaimer: This animation is of a general nature ONLY and is NOT specific to any project. It MUST NOT be relied upon for establishing compliance with the requirements of the NZ Building Act or Building Code. Project specific professional advice MUST BE obtained from a suitably qualified subject matter expert. This animation DOES NOT guarantee correctness, currency, completeness or suitability of the information for any particular purpose and is indicative only. Any use of E23D animations requires prior written permission of the author. Contact [email protected] for further information.