R-2 Trigger Reset Procedure (GT Series) скачать в хорошем качестве

R-2 Trigger Reset Procedure (GT Series)

For GTR Boards see the Bluetooth R2 Video:    • R-2 Bluetooth - Trigger Reset Procedure  (...   This video is to allow the rider to reset the trigger settings on the R-2 remote. If ever the triggers move out of position, the remote will either look as though its paired to the board but will not respond when trying to use, or it may not allow for speed mode buttons to work. Don't stress this is very easy to fix, simply follow the video and reset the magnet values on the trigger. Each remote is set at our Evolve factory before you receive it the same way as the video, so now you can do this if ever there is a need to......make sure to follow the video exactly as is and be sure to press both triggers all the way in as per the video to ensure the remote is set up correctly. If you need assistance please get in touch with your local distributor. • Turn R2 remote on • Go to menu screen – double press the power button quickly • Go to "More Info" – press the Mode 1 or Mode 2 button to scroll through menu • Select "More Info" – press the power button once • Access the trigger settings – double press the power button, double press the Mode 2 button, double press the Mode 2 button (again). • Go to "Set Acc Min" (Set Accelerator Minimum) - press Mode 2 button once to scroll to menu item • "Set Acc Min" - squeeze and hold accelerator all the way in then press the power button once • Go to "Set Acc Max" (Set Accelerator Maximum) – the remote will automatically scroll to this item after setting the accelerator minimum • "Set Acc Max" – release the accelerator completely, then press the power button once • Go to "Set Brake Min" (Set Brake Minimum) - press Mode 2 button once to scroll to menu item • "Set Brake Min" – release the brake completely, then press the power button once • Go to "Set Brake Max" (Set Brake Maximum) - the remote will automatically scroll to this item after setting the brake minimum • "Set Brake Max" – squeeze and hold brake all the way in then press the power button once • Go to "return" to exit trigger settings - the remote will automatically scroll to this item after setting the brake maximum – press the power button once.