Baofeng GT-3: Chirp Programming and USB Cable Driver Troubleshooting скачать в хорошем качестве

Baofeng GT-3: Chirp Programming and USB Cable Driver Troubleshooting

Programming your Baofeng GT-3 with the cable on Windows 10: **EDIT Aug 31, 2021: After many comments about how these instructions didn't work, I decide to try again on a newer laptop I have (still Windows 10). After some troubleshooting, I did get it to work! 1. Upon plugging in the USB cable, in Device Manager, it shows as "PL2303HXA PHASED OUT SINCE 2012. PLEASE CONTACT YOUR SUPPLIER." and no COM port is displayed. You first need to download the Prolific 3.2.0.0 driver (here: https://www.miklor.com/COM/software/P...) and run it to install. 2. Unplug the USB cable, wait a few seconds, then plug it back in so the computer recognizes it. 3. Double-click the error entry above (the PHASED OUT line item) and go to the Driver tab when you see the pop-up. 4. Select Update Driver and choose the options to browse your computer. You should now see the Prolific 3.2.0.0 driver you just installed. Select that and wait for the screen to refresh, and you should now see the COM port assigned and can continue with the rest of the video to get it to work (starting at 2:16). I hope this works for you! **ORINGINAL DESCRIPTION** I could not get the Baofeng software to work and ran into some issues with the USB cable driver and software access, so after finally getting it to work, wanted to share it since no other videos seem to cover these issues that I could find. You will need to install chirp and download the Prolific driver for the cable: Chirp: http://chirp.danplanet.com/projects/c... USB cable driver: http://radioinc.com/Baofeng/software/... (use the Win_Driver_Prolific_3.2.0.0.exe) ****EDIT: The above link no longer works, so this might be a replacement link to try: https://www.miklor.com/COM/software/P...