Cooler Master MH670 Headphones Guide / Troubleshooting (+ description) скачать в хорошем качестве

Cooler Master MH670 Headphones Guide / Troubleshooting (+ description)

main microphone is Blue Yeti; i used google slides because it's more organized that way other things to note: as with all sound devices, turning up the volume makes it sound better the equalizer settings only sound good when connected wirelessly, so if you're wired, you're going to have to fiddle with the settings yourself if you use WDM or KS for your audio output on VoiceMeeter, the equalizer changes will not take effect. only MME works, but there will be a larger audio delay compared to WDM and KS. else, just leave the MH670 as your default playback device for negligible delay. note that recording audio with the MH670 selected as your "speaker" may cause pitch distortion in the outputted audio if you have effects enabled, such as equalizer, speaker shifter, and Xear surround max. the detachable microphone is flexible and remains in the position where you adjusted it to make sure your head/hair is dry before putting them on if you want to prevent gunk build-up the MasterPlus software will also ask to set your default device to the MH670, which causes your microphone to also be set to the MH670 mic despite it being plugged in or not hold the power button to turn on/off the headset plugging in the 3.5mm cable while connected wirelessly will turn off wireless mode stable red led when charging, stable green led when fully charged is weighty (12.2oz) and may cause your hair to have a headset dent after prolonged use (depending on how you position your headset) (about double the weight of the Logitech G435 LIGHTSPEED Wireless); it will fall off your head if you tilt your head backward 90 degrees nice swivel ear cups to reduce outside noise (ear pads cover around the skin nicely) (swivel earcups are a must-have for headphones, as it removes any air gaps between your head and the earpad; i tried out the Logitech PRO X Wired and the HyperX Cloud II which do not have swivel earcups and there was a gap between my head and the earpad on the back side) (HyperX Cloud II apparently doesn't have equalizer, while the Logitech PRO X Wired only had 5 equalizer sliders; perhaps Equalizer APO would work) i'd advise you to dry your hair before using any headset otherwise there will be residue buildup people can hear your audio through your headphones if you are listening at about 20%-30% minimum volume above average listening volume i'd suggest you use strong glue on the weakpoints if you're not planning on taking it apart; this would be the two screws on both sides of the headset above the earcups that are attached to the metal headband (you can find images of the weakpoint in Amazon reviews) 00:00 Intro 00:10 Overview 00:29 Mic Test 01:23 Audio Bleeding through Mic (use wireless / external mic to prevent bleed) 01:46 LED Flashing Green/Red Fix 02:54 Muffled Audio Fix (change equalizer for crisper audio) 04:33 MasterPlus Software 7.1 Surround Sound 05:58 Flexible Headband 06:18 Prone to Breaking? 06:34 Earcup Faux Leather 07:08 Adapter with 2.4GHz Dongle 07:23 Sound Out of One Side Fix 08:00 My Equalizer Settings 09:00 Removeable Earcups/Earpads 09:25 Attaching Earcups 10:13 Earcup Measurements 10:53 7.1 Surround Sound Fix