ABB Underspeed Measurement Application скачать в хорошем качестве

ABB Underspeed Measurement Application

In today’s tech demonstration, Rick Hillmer walks us through an application that actually arose from a customer need. The customer has a belt and pulley system driving a crusher. They need to know as easily as possible if the belt starts slipping in order to stop the infeed motor to the crusher. Let’s take a look. Our suggestion to solve this issue, was to add a flag on the driven pulley shaft and a proximity sensor to detect one pulse per revolution, a very coarse encoder. At 1200 rpm, this will give me 20 pulses per second, or 20hz input. Using the Digital inputs on the ACS880 as a frequency input, I am able to detect and scale that speed back up to actual RPM. In this demo, we actually used the 6 spokes of the pulley to give me 120hz. I cheated and scaled this 120hz input to equal 1900 rpms to give me some margin of error over the drive motor actual speed. Then using Adaptive programming, with one compare block, I compare the feedback speed to the actual motor speed. If feedback speed is less than motor speed, with my margin of error, I turn on relay output 2. I am using a VFD to run this pulley, to simulate belt slipping. As you can see, if my driven pulley slows down, Relay output 2 comes on. This will be used at the customer site to prevent any more product from being fed into an already overloaded system, preventing hours of downtime. I can actually perform this same function with an ACS380 micro drive, although I can’t get quite enough current to run a 500hp motor. Learn more about the ACS880 VFD: https://www.ramcoi.com/abb/acs880-mac... Buy this and thousands of other products on https://www.ramcoi.com Register for your Online account today! https://www.ramcoi.com/secondary/login Connect with us on social media:   / ramcoinnovations     / ramcoinnovation     / ramco-innovations     / ramcoinnovations   LEGAL DISCLAIMER: While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Ramco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability, and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Ramco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.