HOW TO FIT AN EPDM WALL FLASHING TRIM - EPDM LEAD ALTERNATIVE - FLEXIPROOF® скачать в хорошем качестве

HOW TO FIT AN EPDM WALL FLASHING TRIM - EPDM LEAD ALTERNATIVE - FLEXIPROOF®

In this newly updated EPDM roofing video tutorial, you’ll learn how to correctly install EPDM Lead Flashing Alternative or metal wall trims. Using the right tools, materials, and techniques, EPDM Lead Flashing Alternative, or metal, can be used as wall trims on EPDM installations. Become an EPDM flat roofing master with our video tutorials! Contact us with questions or to learn more about our EPDM roofing training: https://www.flexiproof.co.uk/the-epdm... Learn more about the FlexiProof EPDM flat roof system: https://www.flexiproof.co.uk 00:14 Tools required: • Angle grinder • Leaf blower • Scissors • Spirit level • Tape measure • Flathead screwdriver • Lead clips • Sealant gun 00:30 Materials required: • EPDM Lead Flashing Alternative • Silicone sealant 00:38 Steps 1 to 4 Things to be aware of: • The prepared roof surface must be clean, dry, and free from dust and contaminants (bitumen, oil, etc). • In overly exposed areas, or areas with high-wind uplift, it is essential to mechanically fix the flashing through the front face. Please refer to FlexiProof Technical Support for further details. www.flexiproof.co.uk • Always ensure the flashings are overlapping each other by a minimum of 100mm; and that a minimum of a 100mm coverage is achieved on the face of the membrane.