SEN66 Air Quality Monitor Sensor Evaluation Kit - Unboxing | DigiKey скачать в хорошем качестве

SEN66 Air Quality Monitor Sensor Evaluation Kit - Unboxing | DigiKey

We take a look at the SEN66 Air Quality Monitor Sensor Evaluation Kit from Sensirion. It can measure 10 parameters and incorporates all the necessary algorithms, reducing design complexity, development time, and costs. Inside the box, you’ll find the SEN66 sensor module, an adapter cable for the SEK-SensorBridge, a Qwiic adapter cable, and a jumper wire set . In this demo, we’re going to connect to a computer through Sensirion’s SEK-SensorBridge and use Sensirion’s ControlCenter software to collect and evaluate data. Plug the adapter cable into the SEN66 module and the SensorBridge, then plug a micro USB cable into the SensorBridge and the computer. ControlCenter should recognize your sensor automatically. You can configure settings for the different air quality measurement parameters if you need to, but we’ll just start the measurement. It has a 1 hertz sampling rate, so we’ll let it collect data for a while. Now that we’ve collected some data, we can click through the different parameters, with various representations of particulate matter from PM10 down to PM1, VOCs, nitrous oxide, carbon dioxide, and relative humidity and temperature. We can also open the DataViewer to inspect the logged data and narrow our view to times of interest. https://www.digikey.com/en/products/d... Maker.io - https://www.digikey.com/en/maker DigiKey’s Blog – TheCircuit https://www.digikey.com/en/blog Connect with DigiKey on Facebook   / digikey.electronics   And follow us on X https://x.com/digikey