Front hub and bearing removal Ford Expedition 4x4 2003 скачать в хорошем качестве

Front hub and bearing removal Ford Expedition 4x4 2003

This can save you a lot of money. Many shops charge a lot of money for this job since it can take time and be difficult when parts are rusted on good. I highly recommend replacing the brake pads and disc brake rotor with this front bearing assembly job. The brake rotor holds onto the bearing assembly for the front really hard. Both sides of my vehicle the disc brake rotor stayed connected to the bearing assembly. Its not worth the labor to try to separate the brake rotor from the bearing if it does not come off by hand or a light tap. The brake rotor helped remove the bearing assembly once it was hit a few times with a hammer when all bolts were removed. I will show this in the video. The front bearing assemblies both sides would easily cost $1000 for parts and labor in a shop and the shop would change brake pads and rotors. The front brake rotors were around $75 per side, the hub and bearing assemblies are usually around $100 per side and brake pads are around $35 for a set. So parts for me cost around $385 or just under $400. Most shops charge at least $100 per hour for labor and for this job labor is at least 4 to 6 hours depending on shop. Can save lots of money for a job that is fairly simple for an average skilled DIY home mechanic.