How to vacuum bag скачать в хорошем качестве

How to vacuum bag

Learn, step by step, how to make a part, using vacuum bagging. See how easy it is to get a great surface finish. You can use this technique with fiberglass, carbon fiber or Kevlar. I used the wet lay up method, where you apply the resin using a simple brush. 0:00 Introdução 0:10 Paint the mold using two part polyurethane paint 0:35 And use masking tape on the sides to avoid the bag to open 1:06 This part is a hood of the motorglider Ximango 1:34 and a breather fabric that helps the air to flow 1:51 I round the corners using epoxi resin with microballoons 2:11 A small plastic bag helps to apply the resin 2:57 The first layer of fiberglass is the most difficult to apply 3:43 Before the third layer, I use some strips of fiberglass for reinforcement 4:01 These reinforcement help to strength the part and don't weight too much 4:44 The method is the same as putting the fiberglass 4:49 Take a special care on the corners 6:53 The internal surface looks like a sandpaper