How to measure film thickness, adhesion & hardness with the BYK-Gardner byko-cut universal скачать в хорошем качестве

How to measure film thickness, adhesion & hardness with the BYK-Gardner byko-cut universal

The byko-cut universal allows to measure film thickness, adhesion and hardness with only one instrument. Learn more: https://www.byk-instruments.com/en/Ph... _____________________________________________________ How to measure Film Thickness with the byko-cut? Draw a black line perpendicular to the cut direction -- 0:24 Select the correct cutting tool by rotating the blade holder -- 0:33 Apply sufficient pressure to cut through the paint film to the substrate -- 0:39 Turn on the LED light to illuminate the surface -- 0:51 Locate the cut line through the microscope -- 0:59 Analysis -- 1:11 Align the scale to measure the coating layers Count the numbers of lines for each coating layer Calculate the film thickness by using the conversion table in the operating manual _____________________________________________________ How to test Hardness with the byko-cut? -- 1:39 Draw a black line for marking the measuring position -- 1:40 Select the correct cutting tool by rotating the blade holder -- 1:47 Place the byko-cut equipped with slip-on weight on measuring position -- 1:52 Leave instrument 30 sec. in this position -- 2:02 Turn on the LED light to illuminate the surface -- 2:22 Locate the cut line through the microscope -- 2:26 Analysis -- 2:32 Measure of indentation length using the built-in microscope _____________________________________________________ How to measure Adhesion with the byko-cut? -- 2:45 Select the correct cutting tool by rotating the blade holder -- 2:48 Make a lattice pattern in the film by cutting to the substrate -- 2:53 Brush 5 times in diagonal directions -- 3:21 For certain substrates the additional usage of a tape is recommended -- 3:28 Turn on the LED light to illuminate the surface -- 3:33 Examine the grid area using the microscope -- 3:40 Analysis -- 3:50 Classify adhesion results by using the criteria of standard ISO 2409 or ASTM 3359