Siemens G120 Drive: How to take ID Run on Motor скачать в хорошем качестве

Siemens G120 Drive: How to take ID Run on Motor

Siemens G120 Drive Motor ID Run Process: Steps for performing an ID Run: 1.Connect the Motor to the G120 Drive: Ensure that the motor is properly connected to the Siemens G120 drive. Double-check wiring and ensure everything is safe before proceeding. 2.Access the Siemens G120 Drive's Parameters: Using the Siemens Drive Control Panel (e.g., Basic Operator Panel or a connected PC with StartDrive), navigate to the motor settings. 3.Enable the Motor Identification Process: On the control panel, you will find the option to start the Motor ID Run. This is typically located under the motor parameter settings or "Motor Control" menu. 4.Start the ID Run: Select the option to start the ID Run. The drive will automatically apply a low voltage to the motor, and the motor will begin to rotate. The drive measures the electrical characteristics of the motor to detect parameters like resistance, inductance, etc. 5.Motor Speed Monitoring: During the ID Run, the motor will rotate at a controlled speed, and the drive monitors various parameters to identify motor specifications. Make sure the motor has no mechanical load during this process. 6.Completion of the ID Run: Once the motor has completed the ID Run process, the drive will save the motor parameters into its memory, allowing it to use them for optimal performance. 7.Confirm and Save the Parameters: After the ID Run is complete, confirm that the drive has detected the motor correctly. You may need to save the configuration and settings. 8.Start the Motor: Once the motor ID process is successfully completed, you can begin operating the motor under load.