How to Get AES50 Stage Box Outputs Working on Your X32 скачать в хорошем качестве

How to Get AES50 Stage Box Outputs Working on Your X32

How do you get outputs from your Behringer X32 to your AES50 stage box? Let me show you! THE OUTPUT SWITCH ON YOUR STAGE BOX: Your SD8/S16/SD16 has a switch that selects which AES50 outputs feed the physical XLRs: 1-8 = AES50 outputs 1-8 9-16 = AES50 outputs 9-16 17-24 = AES50 outputs 17-24 HOW TO ROUTE IT ON THE X32: 1. Go to Routing → AES50 A or B (whichever your stage box is connected to) 2. The columns (1-8, 9-16, 17-24) correspond to the switch position on your stage box 3. By default, these pull from Outputs 1-8, 9-16, etc. WHAT ARE "OUTPUTS"? Go to Routing → Out tab. This is where you assign what feeds each output (Mix Bus 1, Mix Bus 2, etc.). Make sure these are set to Post-Fader so you can control the volume! PRO TIP FOR SMALLER X32s: If you only have 8 XLR outputs on your console but need more, set your stage box switch to 9-16 and route AES50 outputs 1-8 to pull from Outputs 9-16. Now you have 8 more physical outputs on stage! FREE WEEKLY TIPS FOR LIVE SOUND Mixing techniques delivered every Wednesday: https://newsletter.drewbrashler.com RESOURCES: X32 Fundamentals Course: https://drewbrashler.com/x32-fundamen... Console Presets: https://drewbrashler.com/drew-brashle... PRODUCTS SHOWN: Behringer SD8: Sweetwater: https://sweetwater.sjv.io/6eYx13 Guitar Center: https://guitar-center.pxf.io/zNEzge -- Subscribe for more: https://www.youtube.com/c/drewbrashle... Drew Brashler