Ducati 916 Superbike Full Restoration EP5 скачать в хорошем качестве

Ducati 916 Superbike Full Restoration EP5

Hello and welcome to the final episode of the Ducati 916 restoration but before I go any further I'll just drop this in here The link to my Patreon account and you can check that out if you'd like -   / rrcrestoration   and now ill get on with the description So as you've already seen by the thumbnail this episode finishes off the restoration of the bike. So the first job on my very long to do list was to get the coolant system all back in place but before i could do that i needed to get the coolant reservoir back into tip top condition this was done in the usual manner by chucking it in the ultrasonic cleaner. While the reservoir was cleaning i set about fitting the radiator and all the major coolant hoses once this was done the reservoir was clean and ready for fitting. After that i began fitting all the wiring looms and instrument clusters and hooking everything up and being careful to route everything just the same way that it was when i found it and as the bike fired straight up i must've got all the wiring correct. Then i set my sights on getting the oil breather condenser bottle as it was looking very tatty and not suitable for going back in the frame... yet. I peeled all the old heat foil off and gave the bottle a good clean in the parts washer and then once dried i spray on a little adhesion promoter so that my new heat reflective foil would stick well and then applied said foil and installed the condenser back into the frame. I then tackled the job i was dreading and that was the exhausts as they were very heavily tarnished. I applied a acidic cleaner to the stainless steel that removes the tarnish but doesn't eat into the metal or affect the polished surface this was aided by a stiff nylon brush and then the acid was rinsed off and neutralized and as you can see by the video the exhausts came up just lovely then it was a simple job of fitting them. Once the exhaust system was on that was the last of the major mechanical pieces fitted so i then moved to my clean room and began the fun job of fitting the fairings and of course as soon as the tank was on i just had to fire up the bike and make sure everything was all good and im very pleased to say it was, pure Ducati thunder :). So after hearing that glorious noise i was spurred on to get the rest of the bike built and stickered up and of course as i said in the video the choice of the Termignoni stickers are yours to make. Then it was the obligatory ending shots featuring before and after's And that brings this episode to a close im afraid but i will be back again soon with the next one. As usual i really hope you enjoy this series of videos and leave a like and a comment to let me know what you think. Enjoy RRC ------------------------------------------------------------------------------------------------------------------ A new addition to my videos from now on will be a water mark and my channel name popping up in random places throughout the video as im getting rather tired of people re-uploading my content as their own i hope you guys understand. If you like what you see and have any ideas for the channel or would even like to donate something to restore to the channel please get in touch. :) And as usual if you liked the video please like share and subscribe and help the channel grow. PATREON If you would like to help support the channel you can find my patreon account here   / rrcrestoration   INSTAGRAM- https://www.instagram.com/rrcrestorat... More videos can be found here-    / @rrcrestoration   #Restoration #Ducati #Motorcycle RRC Restoration Ducati 916 Superbike Full Restoration EP5