Nissan Frontier Transfer Case Fluid Change скачать в хорошем качестве

Nissan Frontier Transfer Case Fluid Change

Buy 10mm Hex Socket: https://amzn.to/3hlr4YU Buy Synthetic ATF: https://amzn.to/3906dGg This Video describes how you can drain and fill your transfer case fluid on your Nissan Frontier (Generation 2 D40). The fluid I used is the fully synthetic Automatic Transmission Fluid from Valvoline (2+ quarts). It is rated for Matic-J and Matic-S which is the synthetic version of what the vehicle needs. The fully synthetic version has a much higher critical temperature which means you will most likely never need to replace this fluid once you replace it. This fluid only costs 1.5 as much as the Matic-J equivalent, so please use the synthetic advanced version of the fluid. You will need only a 10mm hex tool / allen key. Step 1: Use a 10mm hex tool to break free the fill plug on the transfer case. Then break free the 10mm hex bolt on the transfer case. Step 2: Drain the transfer case of all of its nasty fluid into a oil catch pan. Step 3: Plug the drain plug and torque till it is mechanically tight. Step 4: Fill the transfer case through the fill plug location using a small bottle (gear oil bottle filled with ATF), or utilize a fluid transfer pump until the fluid spills out of the fill plug location. Step 5: Plug the fill plug location with the bolt and mechanically tighten the bolt. Step 6: Drive the vehicle and switch it from 2wd to 4wd high and 4wd low to mix the fluid. That's it!