Official HTC 10 Display Assembly Repair Guide - Fixez.com скачать в хорошем качестве

Official HTC 10 Display Assembly Repair Guide - Fixez.com

https://www.fixez.com presents the official HTC 10 Screen Replacement Guide. Life is full of obstacles, but dealing with a cracked HTC 10 display assembly does not have to be one of them! Following the step-by-step HTC 10 screen repair instructions we have provided will help you safely replace a damaged or faulty HTC 10 display assembly. Visit Fixez.com for all of the DIY HTC 10 replacement screens, parts and tools you need to fix your cell phone quickly, and affordably. https://www.fixez.com/store/htc/htc-10 If you need your HTC 10 repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday – Friday, 9am to 5pm PST. Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos!    / @fixez   Like us on Facebook:   / fixez.com   Follow us on Twitter:   / fixezdotcom   HTC 10 Display Assembly Repair Video Transcription: Warning: You are performing this repair at your own risk We claim no responsibility for any damages that might occur The DIY HTC 10 repair tools used in this video can be found here: https://www.fixez.com/categories/repa... Step 1 Power down your HTC 10 smartphone. Step 2 (HTC 10 Nano SIM Card Tray and microSD Card Tray) Eject the Nano SIM card tray and then the microSD card tray. Step 3 (HTC 10 Display Assembly) Begin to free the 5.2-inch HTC 10 display assembly by using the heat gun to warm up the adhesive. With the precision knife carefully create separation and insert a playing card to start slicing through the adhesive. Take your time and apply additional heat as needed. When attacking the adhesive, be mindful of the cables for the bottom buttons located next to the capacitive home button. The HTC 10 screen is still connected to the logic board, so don’t try to remove it entirely just yet. Step 4 (HTC 10 Midframe) Remove the following 12 Phillips screws. Use the precision knife to pop the HTC 10 midframe out of the all-metal rear enclosure. Step 5 (HTC 10 Display Assembly) Remove the following 2 Phillips screws. Spudge up the HTC 10 battery connector from the logic board. Use the tweezers to start working through the tape, and then pop off the signal cable. Release the ZIF connector and free the cable for the HTC 10 USB Type-C assembly. Disconnect the HTC 10 display assembly from the logic board and separate it from the midframe. Step 6 (HTC 10 Capacitive Home Button and Fingerprint Sensor) Extract the HTC 10 capacitive home button and fingerprint sensor. If issues develop with the home button, the mild adhesive used will make it an easy fix. * To reassemble your device, follow the steps in reverse order