How to change the alarm battery in the Dyna Fat Bob fxdf 2010 скачать в хорошем качестве

How to change the alarm battery in the Dyna Fat Bob fxdf 2010

“How to Change the TSSM Alarm Module Battery on the 2010 Harley-Davidson Dyna Fat Bob FXDF” Suggested Video Title: How to Replace the Siren Battery in the TSSM Module | Harley-Davidson Dyna Fat Bob FXDF 2010 | DIY Tutorial Description: Hey Harley enthusiasts! 🏍️⚡ Sorry for the previous misunderstanding – this time we're talking about the backup battery for the TSSM (Turn Signal Security Module) alarm module on your 2010 Dyna Fat Bob FXDF, not the fob. This battery is located inside the security system siren and keeps the alarm active even if the bike's main battery dies. Harley recommends replacing it every 3-5 years, or if you hear 3 chirps instead of 2 during alarm tests (a sign that it's dead). This is a bit more technical than the fob, but it can be done in the garage with basic tools. I'll guide you step-by-step with clear visuals, including removing the fuel tank to access the module (located under the fuel tank, on the right frame). Programming is not required, but be careful: if you're not comfortable with it, take the bike to a certified mechanic to avoid damaging the system. What you'll need: • New Harley siren backup battery (type 68633-04 or equivalent 3V lithium battery, costs about €10-15 – check the manual for the exact model) • Wrenches and screwdrivers (allen 3/16, Torx T40) • Pliers and electrical tape • Owner's manual (for the security PIN code) The main steps (no spoilers!): 1. Disconnect the motorcycle's main battery for safety. 2. Remove the fuel tank (empty it first!). 3. Locate the TSSM module and siren under the right frame. 4. Open the siren, remove the old battery, and insert the new one (observing the polarity). 5. Reassemble everything, reconnect, and test the alarm with the fob or PIN. Caution: During testing, use your PIN to disarm the alarm. If the TSSM displays error codes (e.g., 31/32 for low battery), follow the reset procedure in the manual (turn the ignition on/off and press the left switch for 5 seconds). If the system doesn't sync, a dealer can reprogram it. This applies to 2008-2013 Dyna models with TSSM. Save on repair costs and keep your Fat Bob always road-ready! If you have any questions, comment below. Hashtag: #HarleyDavidson #DynaFatBob #FXDF2010 #TSSM #BatteryAlarm #HarleyMaintenance #MotorcycleTutorials #BikerLife #MotorcycleSafety #DIYHarley Subscribe for more Harley fixes: custom, maintenance, and pro tricks! Like if it helps and share with your riding buddies. 🔧🏁