JX-2.2kw high shear batch mixer скачать в хорошем качестве

JX-2.2kw high shear batch mixer

https://ginhong.com/high-shear-mixer/... Please go visit our website above to learn more information about high shear batch mixer. It is a short video of our JX-2.2kw batch homogenizer taken in Ginhong factory. The machine is tested with water and the result shows it in good condition. This mixer adopts pneumatic lifting system and is equipped with two 50L portable vessels. It can be used in any process required mixing, dispersing, homogenization and suspension. Precise workhead provides strong high shear force, which can greatly decrease processing times and improve product consistency. Variable speed controlled by inverter is for different formulaitons. The shaft can be lifted by the button on control panel, which is easy for the operator to raise the mixer and change to another vessel. This type mixer has the advantages of stable operation, low noise, high efficiency and easy for cleaning. What is high shear batch homogenizer? JX batch homogenizer, also called batch mixer, is a top entry high shear mixer for the production of viscous cream and emulsions in the cosmetic, pharmaceutical, food and chemical industries. It’s usually used in a multi shaft mixer for homogenization. What is high shear batch mixer made of? JX top entry batch mixer is usually made one set of rotor and stator, pneumatic or hydraulic lifting system, portable stand, transmission part and motor etc. How does high shear batch homogeniser work? Due to the pneumatic or hydraulic lifting system, the batch mixer is lifted to its top point so that a portable manufacturing tank can be moved below the mixer. After the tank is fixed by the two brackets around the side, the mixer is brought down inside the tank. The rotor is driven by ABB or Siemens motor and rotates at the speed of 3000rpm causing strong centrifugal force. The product is sucked from both top and bottom of the rotor into the high shear zone. The strong centrifugal force drives the product to the narrow gap between the rotor and stator. The product is pressed and crushed by the centrifugal force and then got dispersed, homogenized and emulsified preliminary. Meanwhile, the rotor produces a linear velocity up to 15~40m/s along the tangent. The product goes through the gap between rotor and stator and is dispersed, high sheared, emulsified and homogenized. Then it jets out from the openings of the stator. The product jets out from the batch mixer and then goes circulated inside the manufacturing tank. After several circulations, it’s completely high sheared, dispersed, emulsified and homogenized. You can get in touch with us to know more about high shear batch mixers, contact information as below: YouTube:    / lukewhb   LinkedIn:   / lukewhb   Facebook:   / lukewhb   Email: info@ginhong.com WhatsApp: +86-189 5126 2589